subject
Engineering, 05.05.2020 06:59 HolaConcheeDaBrycee

A technician received an escalated trouble ticket for a laptop that required the replacement of the internal speakers. When the technician arrived and inspected the laptop, he found that the external plastic covers and keyboard bezel that were removed by the previous technician were scratched, cracked, and not fitting together properly. After interviewing the laptop's user, he determined that the laptop covers were fitting properly prior to the initial disassembly by the previous technician.

Which of the following is the most likely reason for this issue?

a. The laptop's internal battery has swollen and disfigured the bottom case of the laptop.
b. The previous technician did not remove the ribbon cable connecting the touch pad and keyboard to the system board.
c. The previous technician was not careful when prying the plastic case apart.
d. The battery and AC adapter were not removed prior to attempting to remove the speakers.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
question
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
You know the right answer?
A technician received an escalated trouble ticket for a laptop that required the replacement of the...
Questions
question
Mathematics, 07.11.2019 02:31
question
Mathematics, 07.11.2019 02:31
question
Geography, 07.11.2019 02:31
question
Mathematics, 07.11.2019 02:31
Questions on the website: 13722361