Pushing on the pump of a soap dispenser compresses a small spring. when the spring is compressed 0.54 cm, its potential energy is 0.0025 j. (a) what is the force constant of the spring? (answer is in kn/m) (b) what compression is required for the spring potential energy to equal 0.0078 j? (answer is in cm),

An ascending elevator, hanging from a cable, is coming to a stop. part a part complete identify all forces acting on the elevator from the list below. select all that apply. select all that apply. kinetic friction normal force tension weight static friction submitprevious answers correct part b draw a free-body diagram of the object. draw the vectors starting at the black dot. the location and orientation of the vectors will be graded. the exact length of your vectors will not be graded but the relative length of one to the other will be graded.

12. ritu obtained a distinct image of a distant tree on the screen with the of a concave mirror.to find the focal length of the mirror she has to measure the distance between: (a) mirror and the tree. (b) screen and the tree.(c) mirror and the screen. (d) mirror and tree as well as between screen and the tree.

Atension test was conducted on a specimen of aisi 1020 hot-rolled steel having an initialdiameter of 9.11 mm. representative test data are given in table1in the form of force and engineering strain. for strain the extensometer gage length was li= 50.8 mm. in addition, minimumdiameters were measuredmanually with a micrometer in the necked region at several points during the test. after fracture, thebroken halves were reassembled, and the following measurements were made: (1) marks originally 25.4 mm apart and on opposite sides of the necked regionwere 38.6 mm apart due to the lengthwise stretching in the specimen; (2) similar marks originally 50.8 mm apart were 70.9 mmapart; (3) the final minimum diameter in the necked region was 5.28 mma) determine the following material properties: elastic modulus, 0.2% offset yield strength, ultimate tensile strength, percent elongation, and percent reduction in area. b) assume that the test was interrupted upon reaching a strain u = 0.007, and the specimen unloaded to zero force. estimate the elastic strain recovered and the plastic strain remaining. also, what would the new length of the original 50.8 mm gage section. hint: might save time/effort to use excel, mathcad, matlab, etc. to solve part a)table1 data and analysis for a tension test on aisi 1020 hot-rolled steeltest dataforce (p, kn)1. 0.002. 6.673. 13.344. 19.135. 17.796. 17.217. 17.538. 17.449. 17.2110. 20.7711. 24.2512. 25.7113. 25.7514. 25.0415. 23.4916. 21.3517. 18.9018. 17.39engr. strain (ε)1. 02. 0.00053. 0.00104. 0.00155. 0.00236. 0.00317. 0.00508. 0.00709. 0.010010. 0.049011. 0.125012. 0.218013. 0.234014. 0.306015. 0.330016. 0.348017. 0.360018. 03660diameter (d, mm)1. 9.112. 9.113. 9.114. 9.115. 9.116. 9.117. 9.118. 9.119. 9.1110. 8.8911. 8.8912. 8.2613. 8.2614. 7.6215. 6.9916. 6.3517. 5.7218. 5.28