Physics, 07.04.2020 21:27 ellie55991

A galvanic cell based on these half-reactions is set up under standard conditions where each solutions is 1.00 L and each electrode weighs exactly 100.0 g. How much will the Cd electrode weigh when the non-standard potential of the cell is 0.03305 V?

Answers: 2

Show answers

Answers

Answer from: robert7248

Complete Question

$Fe^{2+} + 2e^----- Fe \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ E^0_{red} = - 0.441 V$

$Cd^{2+} + 2e^- ----- Cd \ \ \ \ \ \ \ \ \ \ \ \ \ \ E^0_{red} = -0.403V$

A galvanic cell based on these half-reactions is set up under standard conditions where each solutions is 1.00 L and each electrode weighs exactly 100.0 g. How much will the Cd electrode weigh when the non-standard potential of the cell is 0.03305 V?

The mass is M= 117.37g

Explanation:

The overall reaction is as follows

$Cd^{2+} + Fe Fe^{2+} + Cd$

The reaction is this way because the potential of $Cd^{2+} \ reducing \ to \ Cd$ is higher than the potential of $Fe^{2+} \ reducing \ to \ Fe$ so the the Fe would be oxidized and $Cd^{2+}$ would be reduced

At equilibrium the rate constant of the reaction is

$Q = \frac{concentration \ of \ product }{concentration \ of reactant }$

$= \frac{[Fe^{2+}[Cd]]}{[Cd^{2+}][Fe]}$

The Voltage of the cell $E_{cell} = E_{Cd^{2+}/Cd } + E_{Fe^{2+} /Fe}$

Substituting the given values into the equation

$E_{cell} = -0.403 -(-0.441)$

= 0.038V

The voltage of the cell at any point can be calculated using the equation

$E = E_{cell} - \frac{0.059}{n_e} Q$

Where $n_e \ is \ the \ number\ of\ electron$

Substituting for Q

$E = E_{cell} - \frac{0.059}{n_e} \frac{[Fe^{2+}[Cd]]}{[Cd^{2+}][Fe]}$

When E = 0.03305 V

$E = E_{cell} - \frac{0.59}{n_e} \frac{Fe^{2+}}{Cd^{2+}}$

Since we are considering the Cd electrode the equation becomes

$E= E_{cell} - \frac{0.059}{n_e} [\frac{1}{Cd^{2+}} ]$

Substituting values and making [ $Cd^{2+}$ ] the subject

$[Cd^{2+}] =\frac{1}{e^{[\frac{0.03305- 0.038}{\frac{0.059 }{2} }] }}$

= 0.8455M

Given from the question that the volume is 1 Liter

The number of mole = concentration * volume

= 0.8455 * 1

= 0.8455 moles

At the standard state the concentration of $Cd^{2+}$ is =1 mole /L

Hence the amount deposited on the Cd electrode would be

= Original amount - The calculated amount

= 1 - 0.8455

= 0.1545 moles

The mass deposited is mathematically represented as

$mass = mole * molar \ mass$

The Molar mass of Cd = 112.41 g/mol

Mass = 0.1545 *112.41

= 17.37g

Hence the total mass of the electrode is = standard mass + calculated mass

M= 100+ 17.37

M= 117.37g

Answer from: Jasten

The mass of Cd is 121.92 g

Explanation:

The initial concentrations are:

$nFe=\frac{mass}{molecular weight} =\frac{100}{55.845} =1.7906\\nCd=\frac{100}{112.411} =0.88959$

Initially:

[Fe2+] = 1.7906[Cd2+] = 0.88959

After the reaction:

[Fe2+] = 1.7906 + x

[Cd2+] = 0.88959 - x

Eo = Ered - Eoxidation = (-0.403 - 0.441) = 0.038

The Nernst equation is:

$E=0.038-\frac{0.0592}{2} log\frac{[Fe^{2+}] }{[Cd^{2+}] } \\0.03305=0.038-0.0296log\frac{1.7906+x}{0.88959-x}$

Solving for x:

x = -0.195

[Fe2+] = 1.7906 -0.195 = 1.5956

[Cd2+] = 0.88959 + 0.066 = 1.08459

Mass of Cd2+ = 1.08459 * 112.411 = 121.92 g

Answer from: Quest

Answer the above statement is ( false );

Answer from: Quest

Answerthe energy required is 1.60 × 10⁻¹⁸ j, to three significant figures.explanationwe define electric potential as the ratio electric potential energy to the charge, $v = \dfrac{e_p}{q}$ then the following gives us the potential difference, $\delta v = v_b - v_a$ $\begin{aligned} \delta v & = \dfrac{e_p_b}{q} - \dfrac{e_p_a}{q} \\ & = \dfrac{\delta e_p}{q} \end{aligned}$ the formula $\delta v = \delta e_p / q$ may be on your formula sheet.the change in electric potential energy would be the energy that would needed to move it from point a to point b. solving for that, we get $\delta e_p = q\delta v$ using q = 8.00 × 10⁻¹⁹ c and δv = 2.00 v, we get $\begin{aligned} \delta e_p & = (8.00\times10^{-19} \text{ c})(2.00\text{ v}) \\ & = 1.60\times 10^{-18}\text{ j} \end{aligned}$ the energy required is 1.60 × 10⁻¹⁸ j, to three significant figures.

Another question on Physics

Physics, 22.06.2019 00:30

Glass is transparent to visibile light under normal conditions; however, at extremely high intensities, glass will absorb most of the light incident upon it. this works through a process known as multiphoton absorption. in this process, several photons are absorbed at the same time. if very intense light whose photons carry 2ev of energy is shined onto a material with a band gap of 4ev, that light can be absorbed through two-photon absorption, because two photons have the right amount of energy to bridge the band gap. what is the minimum number of photons of 800-nm light that are needed to equal or exceed the band gap of fused silica glass

Answers: 1

Answer

Physics, 22.06.2019 06:00

The magnetic field inside a superconducting solenoid is 4.50 t. the solenoid has an inner diameter of 6.20 cm and a length of 26.0 cm. determine (a) the magnetic energy density in the field and (b) the energy stored in the magnetic field within the solenoid.

Answers: 2

Answer

Physics, 22.06.2019 15:20

Talia is manufacturing rolls of wire for hanging pictures. she needs a material that is so that it can easily be pulled into wire without breaking.

Answers: 2

Answer

Physics, 22.06.2019 19:30

A47.2 g block of copper whose temperature is 480 k is placed in an insulating box with a 91.8 g block of lead whose temperature is 200 k. (a) what is the equilibrium temperature of the two-block system? (b) what is the change in the internal energy of the two-block system between the initial state and the equilibrium state? (c) what is the change in the entropy of the two-block system? the heat capacities of copper and lead are 386 j/kg·k and 128 j/kg·k, respectively.

Answers: 1

Answer

You know the right answer?

A galvanic cell based on these half-reactions is set up under standard conditions where each solutio...

Questions