Physics, 14.10.2019 07:50 Blakemiller2020

1. the illuminance on a surface is 6 lux and the surface is 4 meters from the light source. what is the intensity of the source?
a. 96 candelas b. 72 candelas c. 24 candelas

2. which of the following is accurate in describing converging and diverging lenses?
a. both of these types of lenses have the ability to produce upright images.
b. diverging lenses will produce images behind the lens, and converging lenses will produce images in front of the lens.
c. both of these types of lenses have the ability to produce real images.
d. parallel rays converge into a single point at the focal point of a diverging lens, whereas parallel rays diverge at the focal point of a converging lens and spread out.

3. the light intensity of a source is 100 candelas. the illuminance on a surface is 4 lux. how far is the surface from the source?
a. 4 meters b. 6 meters c. 5 meters d. 7 meters

Answers: 2

Show answers

Another question on Physics

Physics, 22.06.2019 11:30

If forces acting on an object are unbalanced. true or false

Answers: 1

Answer

Physics, 22.06.2019 19:10

3. a worker pushes a 30.5 kg polished stone along a polished table with a force on bonin a straight line for 5.20 s after starting from rest. there is no friction between thestone and the table. at the end of the table. the stone is hooked to a cable with a lengthof 62.0 cm to rotate it to a rough table to store until they can be picked up. the roughtable has a coefficient of static friction 0.702 with the polished stone. remember that 8= 9.80 m/s2a) what is the speed of the stone when it is hooked to the cable? b) what is the tension in the cable while the stone is rotating? (there is still nofriction)c) how much force is needed to make the stone begin sliding from rest on therough table? ius = 0.70262.0 cm30.5 kg20.5 kg6= 0

Answers: 2

Answer

Physics, 22.06.2019 19:30

Select light for the type of wave, adjust the wavelength so that the light is red, and increase the amplitude of the light to the max. then, select the start button at the source location to begin producing the waves. light is a form of electromagnetic wave, containing oscillating electric and magnetic fields. the wave amplitude detector mentioned above shows how the electric field oscillates in time at the location of the probe. the amplitude of the wave at the location of the probe is equal to the maximum electric field measured. how does the amplitude of the wave depend on the distance from the source?

Answers: 2

Answer

Physics, 22.06.2019 20:30

Four identical lab carts each have a mass of 200 kg. different masses are added to the carts and the velocities are measured. all carts move to the right.

Answers: 3

Answer

You know the right answer?

1. the illuminance on a surface is 6 lux and the surface is 4 meters from the light source. what is...

Questions