Alab technician is studying the effect of temperature on the resistance of a current carrying wire. she applies a voltage to a silver wire at a temperature of 57.0°c and notes that it produces a current of 1.50 a. if she then applies the same voltage to the same wire at −88.0°c, what current should she expect (in a)? the temperature coefficient of resistivity for silver is 3.80 ✕ 10−3 (°c)−1. (assume that the reference temperature is 20°c.)

Arock is dropped from a cliff and reaches the ground in 2.70s. at the same time another rock is thrown horizontally from the same height with initial x velocity of 0.95 m/s. what distance will in x will the second rock cover?

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

Which of the following are considered noble gases? a. bromine b. neon c. argon d. chlorine