What is an advantage of making plant-based products, such as cotton, instead of making petroleum-based products, such as plastics? a. producing plant-based products requires more energy. b. factories that make plant-based products generate more waste. c. plants that are used to make the product can be replaced. d. all plant-based products cost more than petroleum-based products.

The magnitude of the poynting vector of a planar electromagnetic wave has an average value of 0.939 w/m2 . the wave is incident upon a rectangular area, 1.5 m by 2.0 m, at right angles. how much total electromagnetic energy falls on the area during 1.0 minute

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

Ineed asap! list 3 examples in which friction us or makes things easier in our daily life. explain the effect of friction for each. *make sure you explain the effect of friction for each example! *