Engineering, 13.09.2021 21:00 kaylee2828
What model do technicians use to discuss systems and is abbreviated
Answers: 1
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
What model do technicians use to discuss systems and is abbreviated...
Mathematics, 06.11.2020 08:00
History, 06.11.2020 08:00
Mathematics, 06.11.2020 08:00
Biology, 06.11.2020 08:00
History, 06.11.2020 08:00
Mathematics, 06.11.2020 08:00
Computers and Technology, 06.11.2020 08:00
English, 06.11.2020 08:00
Mathematics, 06.11.2020 08:00
Business, 06.11.2020 08:00
Mathematics, 06.11.2020 08:00
Mathematics, 06.11.2020 08:00