subject
Engineering, 27.12.2020 15:50 ozieera

The Concorde jet was a supersonic plane created in 1976 to speed transportation across the ocean. It traveled at twice the speed of sound, shortening a normal seven- to eight-hour transatlantic trip to three and a half hours. However, the Concorde still had to fly in the same atmospheric conditions as every other plane. Given this information, answer the following questions: a. In which layer of the atmosphere did the Concorde cruise?
b. What are the characteristics of this layer that make it the ideal layer for the Concordeto travel?
c. Why wouldn't it travel higher?
d. Why wouldn't it travel lower?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 19:10
A)-explain briefly the importance of standards in engineering design. b)- what is patent? c)-explain the relationship between these standards: b.s. and b.s.en d)- in engineering design concepts, types of loads and how they act are important factors. explain.
Answers: 3
question
Engineering, 04.07.2019 19:20
Acommercial grade cubical freezer, 4 m on a side, has a composite wall consisting of an exterior sheet of 5.0-mm thick plain carbon steel (kst= 60.5 w/m k), an intermediate layer of 100-mm thick polyurethane insulation (kins 0.02 w/m k), and an inner sheet of 5.0- mm thick aluminium alloy (kal polyurethane insulation and both metallic sheets are each characterized by a thermal contact resistance of r 2.5 x 104 m2 k/w. (a) what is the steady-state cooling load that must be maintained by the refrigerator under conditions for which the outer and inner surface temperatures are 25°c and -5°c, respectively? (b) for power saving purpose, which wall material should be increased/reduced in. thickness in order to reduce 50% of the cooling load found in part (a)? redesign the thickness of the proposed material. 177 w/m-k). adhesive interfaces between the q=575.93 w
Answers: 2
question
Engineering, 04.07.2019 19:20
A5 kg block of fe is dropped into a very large vat of water. the fe and water initial temperatures are 95 and 25 c, respectively. the fe final temperature is 25 c and the water can be treated as a thermal reservoir,. treated as a thermal reservoir take the water to be the system and determine the entropy generation. report vour answer in kj/k.
Answers: 1
question
Engineering, 06.07.2019 03:10
Asolid steel sphere (k=63.9 w m-1 k-1 , ? =7832 kg m-3 , c=0.523 kj kg-1 k-1 ), 100 mm in diameter is initially at a uniform temperature of 500o c and is suddenly quenched in a large oil bath for which t? = 100o c and h = 3200 w m-2 k-1. estimate the time required for the sphere to cool to 200o c and to 110o c
Answers: 1
You know the right answer?
The Concorde jet was a supersonic plane created in 1976 to speed transportation across the ocean. It...
Questions
question
Mathematics, 24.11.2020 18:40
question
Mathematics, 24.11.2020 18:40
question
Biology, 24.11.2020 18:40
Questions on the website: 13722360