Engineering, 04.12.2020 19:20 rwlockwood1
Which sketch constraint locks the endpoint of a line to the endpoint of another line in Onshape?
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
Which sketch constraint locks the endpoint of a line to the endpoint of another line in Onshape?...
Questions
Arts, 17.09.2019 19:30
Computers and Technology, 17.09.2019 19:30
Mathematics, 17.09.2019 19:30
Social Studies, 17.09.2019 19:30
Chemistry, 17.09.2019 19:30
Mathematics, 17.09.2019 19:30
Health, 17.09.2019 19:30
Mathematics, 17.09.2019 19:30
English, 17.09.2019 19:30
Physics, 17.09.2019 19:30
