Engineering, 20.11.2020 07:20 adwinajames

Part A The goal of your presentation is to provide information about one scientist’s life, work, and contributions to science. Choose a scientist to research and present about from this list:

John Dalton
J. J. Thomson
Marie Curie
Ernest Rutherford
Henry Moseley
Niels Bohr
Werner Heisenberg
Erwin Schrödinger
James Chadwick
Your presentation should answer questions such as these:

What was the scientist’s early life like?
What was the scientist’s personality like?
Did any world events affect the scientist? If yes, what were those events?
Did the scientist have to overcome any obstacles to become a scientist? If yes, what were those obstacles?
In what way did the scientist investigate the atom? Did the scientist use an observational study, a controlled experiment, or a mathematical model? What new understanding did the scientist achieve that resulted in an update to the atomic model?
Which scientist will you write about? Explain why you made that choic

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

Engineering, 04.07.2019 19:10

The air in an automobile tire with a volume of 0.015 m3 is at 32°c and 140 kpa gage. determine the amount of air that must be added to raise the pressure to the recommended value of 206 kpa gage. assume the atmospheric pressure to be 128 kpa and the temperature and the volume to remain constant.[r-0.287 kj/kgk]

Answers: 3

Answer

Engineering, 06.07.2019 03:10

Consider a 1.2 meter high and 2 meter wide glass window whose thickness is 6 mm and thermal conductivity is 0.78 w/m °c. the room temperature is maintained at 24 °c, while the outdoor temperature is -5 °c. the convective heat transfer coefficients on the inner and outer surfaces of the window are 10 w/m2 °c and 25 w/m2 °c respectively. (a) draw the thermal resistance network, etermine the steady rate of heat transfer t e glass window (c) determine the temperature of the inner surface of the window

Answers: 3

Answer

You know the right answer?

Part A The goal of your presentation is to provide information about one scientist’s life, work, an...

Questions