Your company is planning to build a pipeline to transport gasoline from the refinery to a field of storage tanks. The parameters for the prototype system are a pipe diameter of 1 m, with a flow velocity of 0.5 m/s at 25°C. The model system will use water at STP with a geometric scaling factor of 1 : 20. What fluid velocity is required in the model system to guarantee kinematic similarity in the form of equal Reynolds numbers?

The model system will need water flowing at a velocity of 2.07 meters per second to guarantee kinematic similarity in the form of equal Reynolds numbers.

Explanation:

The Reynolds number () is a dimensionless criterion use for flow regime of fluids, which is defined as:

(Eq. 1)

Where:

- Density, measured in kilograms per cubic meter.

- Dynamic viscosity, measured in kilograms per meter-second.

- Average flow velocity, measured in meters per second.

- Pipe diameter, measured in meters.

We need to find the equivalent velocity of water used in the prototype system. In this case, we assume that . That is:

(Eq. 2)

Where subindex is used for water and for gasoline.

If we know that , , , , , and , then we get the following formula:

The fluid velocity for the prototype system is:

The model system will need water flowing at a velocity of 2.07 meters per second to guarantee kinematic similarity in the form of equal Reynolds numbers.

the warning light flashes for a second or two when the engine starts. if it stays on, there's must be something wrong with the coolant. you should never dare to continue driving when the light is on. pull over as soon as possible and shut the engine off.

hope this is what you're talking about