Engineering, 21.10.2020 16:01 hqlego6882

A spring-loaded toy gun is used to shoot a ball of mass m = 1.50 kg straight up in the air. The spring has spring constant k = 667 N/m. If the spring is compressed a distance of 25.0 centimeters from its equilibrium position y = 0 and then released, the ball reaches a maximum height h max (measured from the equilibrium position of the spring). There is no air resistance, and the ball never touches the inside of the gun. Assume that all movement occurs in a straight line up and down along the y axis. 1. Which of the following statements are true?

a. Mechanical energy is conserved because no dissipative forces perform work on the ball.
b. The forces of gravity and the spring have potential energies associated with them.
c. No conservative forces act in this problem after the ball is released from the spring gun.

2. Find vm the muzzle velocity of the ball.
3. Find the maximum height hmax of the ball.

Answers: 1

Show answers

Answers

Answer from: Apple557

1) a) Mechanical energy is conserved because no dissipative forces perform work on the ball.

2) The muzzle velocity of the ball is approximately 5.272 meters per second.

3) The maximum height of the ball is 1.417 meters.

Explanation:

1) Which of the following statements are true?

a) Mechanical energy is conserved because no dissipative forces perform work on the ball.

True, statement indicates that there is no air resistence and no friction between ball and the inside of the gun because the first never touches the latter one.

b) The forces of gravity and the spring have potential energies associated with them.

False, force of gravity do work on the ball and spring receives a potential energy at being deformated by the ball.

c) No conservative forces act in this problem after the ball is released from the spring gun.

False, the absence of no conservative forces is guaranteed for the entire system according to the statement of the problem.

2) According to the statement, we understand that spring is deformed and once released and just after reaching its equilibrium position, the muzzle velocity is reached. As spring deformation is too small in comparison with height, we can neglect changes in gravitational potential energy. By Principle of Energy Conservation, we describe the motion of the ball by the following expression:

$U_{k, 1}+K_{1}=U_{k,2}+K_{2}$ (Eq. 1)

Where:

$U_{k,1}$ , $U_{k,2}$ - Initial and final elastic potential energies of spring, measured in joules.

$K_{1}$ , $K_{2}$ - Initial and final translational kinetic energies of the ball, measured in joules.

After using definitions of elastic potential and translational kinetic energies, we expand the equation above as:

$\frac{1}{2}\cdot m\cdot (v_{2}^{2}-v_{1}^{2}) = \frac{1}{2}\cdot k\cdot (x_{1}^{2}-x_{2}^{2})$

And the final velocity is cleared:

$m\cdot (v_{2}^{2}-v_{1}^{2}) = k\cdot (x_{1}^{2}-x_{2}^{2})$

$v_{2}^{2}-v_{1}^{2} =\frac{k}{m}\cdot (x_{1}^{2}-x_{2}^{2})$

$v_{2}^{2} =v_{1}^{2}+\frac{k}{m}\cdot (x_{1}^{2}-x_{2}^{2})$

$v_{2} = \sqrt{v_{1}^{2}+\frac{k}{m}\cdot (x_{1}^{2}-x_{2}^{2}) }$ (Eq. 2)

Where:

$v_{1}$ , $v_{2}$ - Initial and final velocities of the ball, measured in meters per second.

- Spring constant, measured in newtons per meter.

- Mass of the ball, measured in kilograms.

$x_{1}$ , $x_{2}$ - Initial and final position of spring, measured in meters.

If we know that $v_{1} = 0\,\frac{m}{s}$ , $k = 667\,\frac{N}{m}$ , $m = 1.50\,kg$ , $x_{1} = -0.25\,m$ and $x_{2} = 0\,cm$ , the muzzle velocity of the ball is:

$v_{2} =\sqrt{\left(0\,\frac{m}{s} \right)^{2}+\left(\frac{667\,\frac{N}{m} }{1.50\,kg} \right)\cdot [(-0.25\,m)^{2}-(0\,m)^{2}]}$

$v_{2}\approx 5.272\,\frac{m}{s}$

The muzzle velocity of the ball is approximately 5.272 meters per second.

3) After leaving the toy gun, the ball is solely decelerated by gravity. We construct this model by Principle of Energy Conservation:

$U_{g,2}+K_{2} = U_{g,3}+K_{3}$ (Eq. 3)

Where:

$U_{g,2}$ , $U_{g,3}$ - Initial and gravitational potential energies of the ball, measured in joules.

$K_{2}$ , $K_{3}$ - Initial and final translational kinetic energies of the ball, measured in joules.

After applying definitions of gravitational potential and translational kinetic energies, we expand the equation above and solve the resulting for the final height:

$m\cdot g \cdot (h_{3}-h_{2}) = \frac{1}{2}\cdot m \cdot (v_{2}^{2}-v_{3}^{2})$

$h_{3}-h_{2}=\frac{v_{2}^{2}-v_{3}^{2}}{2\cdot g}$

$h_{3} = h_{2} +\frac{v_{2}^{2}-v_{3}^{2}}{2\cdot g}$ (Eq. 4)

$h_{2}$ , $h_{3}$ - Initial and final heights of the ball, measured in meters.

$v_{2}$ , $v_{3}$ - Initial and final velocities of the ball, measured in meters per second.

- Gravitational acceleration, measured in meters per square second.

If we get that $v_{2} = 5.272\,\frac{m}{s}$ , $v_{3} = 0\,\frac{m}{s}$ , $h_{2} = 0\,m$ and $g = 9.807\,\frac{m}{s^{2}}$ , the maximum height of the ball is:

$h_{3} = 0\,m+\frac{\left(5.272\,\frac{m}{s} \right)^{2}-\left(0\,\frac{m}{s} \right)^{2}}{2\cdot \left(9.807\,\frac{m}{s^{2}} \right)}$

$h_{3} = 1.417\,m$

The maximum height of the ball is 1.417 meters.

Answer from: Quest

El presidente del gobierno mariano y el presidente

Answer from: Quest

True i’m pretty sure

Another question on Engineering

Engineering, 03.07.2019 23:20

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

Answer

You know the right answer?

A spring-loaded toy gun is used to shoot a ball of mass m = 1.50 kg straight up in the air. The spri...

Questions