Design a series circuit in MultiSim that has 4 resistors of different values and has a 5V battery as the source. Calculate the power in each element and compare it to the MultiSim power probe values. Show that the magnitude of Power Supplied is equal to the magnitude of Power Dissipated. Turn in a screenshot of the MultiSim circuit with the power probe readings visible and hand calculations.

Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency

Acommercial grade cubical freezer, 4 m on a side, has a composite wall consisting of an exterior sheet of 5.0-mm thick plain carbon steel (kst= 60.5 w/m k), an intermediate layer of 100-mm thick polyurethane insulation (kins 0.02 w/m k), and an inner sheet of 5.0- mm thick aluminium alloy (kal polyurethane insulation and both metallic sheets are each characterized by a thermal contact resistance of r 2.5 x 104 m2 k/w. (a) what is the steady-state cooling load that must be maintained by the refrigerator under conditions for which the outer and inner surface temperatures are 25°c and -5°c, respectively? (b) for power saving purpose, which wall material should be increased/reduced in. thickness in order to reduce 50% of the cooling load found in part (a)? redesign the thickness of the proposed material. 177 w/m-k). adhesive interfaces between the q=575.93 w

Aspring-mass system consists of a mass weighing 20 kg and a spring with stiffness of 1000 n/m. the mass is subjected to resonance by a harmonic force f(t) 20 cos wt n. the initial condition is given as the initial position 0 and the initial velocity 0. find the amplitude of the forced motion at the end of (a) 1.5 cycle and (b) 2.25 cycles