A cylinder of length L would be made to carry a torque T with an angle of twist ɸ. There are two options considered: 1) hollowed cylinder with an inner radius that is equal to 0.9 of the outer radius, and 2) solid cylinder (with a different radius). If both options would be made from the same material and must have the same angle of twist ɸ under the torque T, find the ratio of the weight between the cylinder designed for option 1 and option 2.

Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.