Engineering, 21.05.2020 00:05 Ezekielcassese

Water is to be heated from 10°C to 80°C as it flows through a 2 cm internal diameter, 13 m long tube. The average flow rate of water is 5 L/min. Find average velocity of water and the convection heat transfer coefficient. The water is heated using an electric resistance heater (in the tube) which provides uniform heating throughout the surface of the tube. The outer diameter of the tube is well insulated, such that in steady operation all the heat generated in the heater is transferred to the water in the tube. Assume turbulent flow for Re > 5000 for this problem

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery

Answers: 2

Answer

Engineering, 04.07.2019 18:10

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

Answer

You know the right answer?

Water is to be heated from 10°C to 80°C as it flows through a 2 cm internal diameter, 13 m long tube...

Questions