Engineering, 17.04.2020 20:21 bricakes3

One pound of air as an ideal gas executes a Carnot power cycle. The isothermal expansion occurs at 2000 degree R from a pressure of 2710 lbf/in.^2 to a pressure of 1882 lbf/in^2. The isothermal compression occurs at 537 degree R from a pressure of 14.73 lbf/in.^2. to a pressure of 21.17 lbf/in.^2 Determine (a) the heat transfer to the air during the isothermal expansion, in Btu. (b) the heat transfer from the air during the isothermal compression, in Btu. (c) the work done by, or on, the air in each of the four processes, in Btu. (d) the cycle thermal efficiency. (e) Sketch the cycle on p-upsilon coordinates.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

Answer

Engineering, 04.07.2019 08:10

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um

Answers: 2

Answer

You know the right answer?

One pound of air as an ideal gas executes a Carnot power cycle. The isothermal expansion occurs at 2...

Questions