Engineering, 15.04.2020 01:55 heyitshenna96

P10.12. A certain amplifier has an open-circuit voltage gain of unity, an input resistance of and an output resistance of The signal source has an internal voltage of 5 V rms and an internal resistance of The load resistance is If the signal source is connected to the amplifier input terminals and the load is connected to the output terminals, find the voltage across the load and the power delivered to the load. Next, consider connecting the load directly across the signal source without the amplifier, and again find the load voltage and power. Compare the results. What do you conclude about the usefulness of a unity-gain amplifier in delivering signal power to a load

Answers: 3

Show answers

Answers

Answer from: juarezanthony258

complete question

A certain amplifier has an open-circuit voltage gain of unity, an input resistance of 1 \mathrm{M} \Omega1MΩ and an output resistance of 100 \Omega100Ω The signal source has an internal voltage of 5 V rms and an internal resistance of 100 \mathrm{k} \Omega.100kΩ. The load resistance is 50 \Omega.50Ω. If the signal source is connected to the amplifier input terminals and the load is connected to the output terminals, find the voltage across the load and the power delivered to the load. Next, consider connecting the load directly across the signal source without the amplifier, and again find the load voltage and power. Compare the results. What do you conclude about the usefulness of a unity-gain amplifier in delivering signal power to a load?

3.03 V 0.184 W

2.499 mV 125*10^-9 W

Explanation:

First, apply voltage-divider principle to the input circuit: 1

$V_{i}= (R_i/R_i+R_s) *V_s = 10^6/10^6+(0.1*10^6)\\$ *5

= 4.545 V

The voltage produced by the voltage-controlled source is:

A_voc*V_i = 4.545 V

We can find voltage across the load, again by using voltage-divider principle:

V_o = A_voc*V_i*(R_o/R_l+R_o)

= 4.545*(100/100+50)

= 3.03 V

Now we can determine delivered power:

P_L = V_o^2/R_L

= 0.184 W

Apply voltage-divider principle to the circuit:

V_o = (R_o/R_o+R_s)*V_s

= 50/50+100*10^3*5

= 2.499 mV

Now we can determine delivered power:

P_l = V_o^2/R_l

= 125*10^-9 W

Delivered power to the load is significantly higher in case when we used amplifier, so a unity gain amplifier can be useful in situation when we want to deliver more power to the load. It is the same case with the voltage, no matter that we used amplifier with voltage open-circuit gain of unity.

P10.12. A certain amplifier has an open-circuit voltage gain of unity, an input resistance of and an

Answer from: Quest

answer:

an example of solubility is salt or sugar dissolving in water.

rate as brainliest plz

Answer from: Quest

answer:

yes

explanation:

Another question on Engineering

Engineering, 04.07.2019 18:10

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

Answer

Engineering, 04.07.2019 19:10

What are the major differences between injection molding and extrusion?

Answers: 2

Answer

You know the right answer?

P10.12. A certain amplifier has an open-circuit voltage gain of unity, an input resistance of and an...

Questions