Engineering, 08.04.2020 23:46 kkcheers16

Using the example above, you need to write the actual problem statement for the problem presented below, which would be the part that begins with: “The goal of this project is…”
Then, you are going to determine 5 “customer needs” that must be considered for anyone trying to come up with a solution to the mosquito problem below.

Design Problem: - Non-Chemical way to Kill Mosquitoes in swamps
Problem Description:
Here in South Carolina, Mosquitoes are a nuisance because of the prevalence of standing water in swamps. While it is possible to use chemicals to treat the water and kill the mosquito larvae, these chemicals have been found to kill bees, which are essential to farms and are rapidly becoming an endangered species. The goal of this project is .

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

Answer

You know the right answer?

Using the example above, you need to write the actual problem statement for the problem presented be...

Questions