Engineering, 07.04.2020 20:28 snikergrace
A commercial grade cubical freezer, 3m on a side, has a composite wall consisting of an exterior sheet of 6.35mm-thick plain carbon steel, an intermediate layer of 100mm-thick aluminum alloy (2024). Adhesive surfaces between the insulation and the metallic strips are each characterized by a thermal contact resistance of R=2.5*10^-4 m^2*K/W. What is the steady-state cooling load that must be maintained by the refrigerator under conditions for which the outer and inner surface temperatures are 22 degrees celsius and -6 degrees celsius, respectively?
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
You know the right answer?
A commercial grade cubical freezer, 3m on a side, has a composite wall consisting of an exterior she...
Questions
Mathematics, 10.03.2020 02:32
Mathematics, 10.03.2020 02:32
