Engineering, 04.04.2020 01:35 smandylee123
Knowing that the bending moment in the reinforced concrete beam is +95 kip·ft and that the modulus of elasticity is 3.625 × 106 psi for the concrete and 29 × 106 psi for the steel, determine the stress in the steel and the maximum stress in the concrete.
Answers: 1
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
Engineering, 04.07.2019 19:10
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
Knowing that the bending moment in the reinforced concrete beam is +95 kip·ft and that the modulus o...
Physics, 07.12.2020 08:30
Physics, 07.12.2020 08:30
Mathematics, 07.12.2020 08:30
Mathematics, 07.12.2020 08:30
Mathematics, 07.12.2020 08:30
Physics, 07.12.2020 08:30
Social Studies, 07.12.2020 08:30
Business, 07.12.2020 08:30
Business, 07.12.2020 08:30
English, 07.12.2020 08:30
Business, 07.12.2020 08:30
Mathematics, 07.12.2020 08:30