Engineering, 21.03.2020 04:25 makaalbarnthemeister
For a steel alloy it has been determined that a carburizing heat treatment of 5-h duration will raise the carbon concentration to 0.38 wt% at a point 1.2 mm from the surface. Estimate the time (in h) necessary to achieve the same concentration at a 5.4 mm position for an identical steel and at the same carburizing temperature.
Answers: 1
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
Engineering, 04.07.2019 18:20
Air flows over a heated plate à t a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
Engineering, 04.07.2019 19:10
When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?
Answers: 2
For a steel alloy it has been determined that a carburizing heat treatment of 5-h duration will rais...
History, 06.04.2020 02:20
Biology, 06.04.2020 02:20
Mathematics, 06.04.2020 02:20
Health, 06.04.2020 02:20
Mathematics, 06.04.2020 02:20
Mathematics, 06.04.2020 02:20
Biology, 06.04.2020 02:20
Biology, 06.04.2020 02:21