Design an active bandpass filter subject to the following constraints:

•cascade a first-order active lowpass filter, a first-order active highpass filter and possibly aninverting amplifier.
•fc1= 300hz and fc2= 3khz.
•maximum gain (gain at f0) in the passband 1 shall be 20db
•using standard resistor values available in the lab room.
•draw the schematic diagram of your finished design.

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86