Engineering, 02.11.2019 03:31 maddo36
If the surface energy of a magnesium oxide - nickel oxide (mgo-nio) solid solution is 1.13 j/m2 and its elastic modulus is 196 gpa, what is the maximum length of an internal elliptical flaw, in mm, if the ceramic part must survive an applied tensile stress of 39 mpa normal to this elliptical flaw ?
be careful !
make sure you reference the flaw geometry figures that explain how the length of a flaw type (internal / external) correlates to the value of a.
answer format: x. xx
unit: mm
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
You know the right answer?
If the surface energy of a magnesium oxide - nickel oxide (mgo-nio) solid solution is 1.13 j/m2 and...
Questions
Social Studies, 30.01.2020 20:02
History, 30.01.2020 20:02
Mathematics, 30.01.2020 20:02
Mathematics, 30.01.2020 20:02
English, 30.01.2020 20:02
Mathematics, 30.01.2020 20:02
English, 30.01.2020 20:02
