Engineering, 08.10.2019 03:30 SupremeNerdx

Special furnace. when the newly, solidified ingot is removed from the furnace, it is assumed to have a uniform initial temperature of 1600 k, which is below the crystallization temperature. at this temperature, the thermal conductivity of silicon is 22w=m? k, the density is 2300 kg=m3, and the heat capacity is 1000 j=kg ? k. the hot solid silicon ingot is allowed to cool in air maintained at a constant ambient temperature of 30°c. the diameter of the silicon rod is 15 cm. end effects are considered negligible. the convective heat-transfer coefficient is 147w=m2 ? k. what temperature will exist 1.5 cm from the surface of the ingot after a cooling time of 583 sec (9.72 min)?

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m

Answers: 1

Answer

Engineering, 04.07.2019 19:10

For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.

Answers: 2

Answer

You know the right answer?

Special furnace. when the newly, solidified ingot is removed from the furnace, it is assumed to have...

Questions