Engineering, 18.09.2019 20:10 ednalovegod
Two 2.30 cm × 2.30 cm plates that form a parallel-plate capacitor are charged to ± 0.708 nc . part a what is the electric field strength inside the capacitor if the spacing between the plates is 1.00 mm ? express your answer with the appropriate units. e e = nothing nothing submitrequest answer part b what is potential difference across the capacitor if the spacing between the plates is 1.00 mm ? express your answer with the appropriate units. v v = nothing nothing submitrequest answer part c what is the electric field strength inside the capacitor if the spacing between the plates is 2.00 mm ? express your answer with the appropriate units. e e = nothing nothing submitrequest answer part d what is the potential difference across the capacitor if the spacing between the plates is 2.00 mm ? express your answer with the appropriate units. v v = nothing nothing submitrequest answer provide feedback next
Answers: 2
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Two 2.30 cm × 2.30 cm plates that form a parallel-plate capacitor are charged to ± 0.708 nc . part a...
Geography, 03.09.2019 01:30
Social Studies, 03.09.2019 01:30
Social Studies, 03.09.2019 01:30
Mathematics, 03.09.2019 01:30
Computers and Technology, 03.09.2019 01:30
Mathematics, 03.09.2019 01:30