Engineering, 13.09.2019 23:20 unkown77
Write the type of chips generated at each of the following cutting conditions, and explain why. a. low cutting speed: b. large depth of cut: c. very high cutting speed d. low rake angle
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
Write the type of chips generated at each of the following cutting conditions, and explain why. a. l...
Questions
Geography, 24.01.2020 05:31
Mathematics, 24.01.2020 05:31
Mathematics, 24.01.2020 05:31
Mathematics, 24.01.2020 05:31
Mathematics, 24.01.2020 05:31
Mathematics, 24.01.2020 05:31
Mathematics, 24.01.2020 05:31
Engineering, 24.01.2020 05:31
Mathematics, 24.01.2020 05:31
Social Studies, 24.01.2020 05:31
Mathematics, 24.01.2020 05:31
