subject
Engineering, 23.08.2019 05:30 brandiwingard

Water is pumped from a reservoir (water surface elevation = 111 m) and delivered to a higher elevation of 150.2 m as a free discharge through a 500 mm diameter pipe. the pump which is rated at 150 kw has a 70% efficiency. if the head loss in the pipe system is given by hl (m) = 46.42 q^2 (q in m^3/s). determine the discharge from the pump

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
question
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
question
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
You know the right answer?
Water is pumped from a reservoir (water surface elevation = 111 m) and delivered to a higher elevati...
Questions
question
Mathematics, 05.05.2020 14:46
question
Mathematics, 05.05.2020 14:46
question
Mathematics, 05.05.2020 14:46
question
Mathematics, 05.05.2020 14:46
Questions on the website: 13722363