Anetwork engineer configures the ip route 10.1.1.0 255.255.255.0 s0/0/0 command on a router, and then issues a show ip route command from enable mode. no routes for subnet 10.1.1.0/24 appear in the output.
which of the following could be true?
a. the ip routecommand has incorrect syntaz and was rejected in config mode.
b. interface s0/0/0 is down.
c. the router has no up/up interfaces in class a network 10.0.0.0.
d. the ip routecommand is missing a next-hop router ip address.

Interface s0/0/0 is down could be true.

B. Interface s0/0/0 is down.

Explanation:

Network engineer is configuration the router and router tcpip address is 10.1.1.0.

Once end use connected to laptop he has check whether router is ping to gateway.

If returns are positive pinging reply then network is connected and he or she can access the network.

His or her workstation or laptop or desktop is not pinging and not connected to gateway or router then interface s/0/0/0 is down.

Since interface s/0/0/0 is down connectivity will be down. Network connectivity will be issue.

answer: internal fragmentation is the difference between the (fixed) size of a memory hole and the data within in that memory. for example, if a 1,024 byte block of memory holds 800 bytes of data, then the 224 bytes difference is considered lost to internal fragmentation.

external fragmentation occurs when the sum of memory fragments is large enough to satisfy a request, but the holes are non-contiguous and the request cannot be satisfied. this can occur when memory is dynamically allocated and freed.

explanation:

answer; geometric center line;