06-19 (mz 8.28) (augmented by jj) during drinking water treatment, 17 lb. of chlorine are added daily to disinfect 5 million gallons of water. (a) what is the aqueous concentration of chlorine (in mg/l) resulting from this mixture? (b) if the measured chlorine residual is 0.20 mg/l, what is the chlorine demand in mg/l?0.41 mg/l, 0.21 mg/l. the chlorine demand is the difference between the concentration of chlorine added during disinfection and the chlorine residual. the chlorine residual is the concentration of chlorine that remains after treatment so the water maintains its disinfecting power in the distribution system. we normally measure demand in the lab and then calculate the chlorine application required at the plant to achieve a desired residual. (c) if the desired chlorine residual is 0.5 mg/l, how many pounds per day must be added to the flow?29.6 lb/d.

As cooking food that has to go in the oven

Note that 2 mol dm⁻³ = 2 mol/(dm³)outline: we're given the concentration of hcl, which is  2 mol dm⁻³ (cubic meters in the denominator can represent volume, so i know this is concentration). we're an amount of calcium carbonate caco₃, which is 5 g. we're presented with a chemical equation which includes caco₃ and hcl. we are told to find the volume of hcl. from what we see so far, this seems to be a stoichiometry  problem. we'll have to use the given information about calcium carbonate to find the amount of moles of hcl needed to fully react with calcium carbonate. then we'll have information about the moles of hcl and the concentration of hcl; that will be enough to figure out volume according to the formula concentration = moles / volume.======all the answer choices are not in dm.convert the given concentration so that it uses cm⁻³.we can use conversion factors. we have to cube our conversion factors so that dimensional analysis works.we can convert to meters first, using the fact that     10 dm = 1 m  ⇔ 10³ dm³ = 1 m³then we use the fact that     10² cm = 1 m ⇔ (10² cm)³ = (1 m)³ ⇔ 10⁶ cm³ = 1 m³so converting:     now we have to find the moles of hydrochloric  acid neededfind the moles of calcium carbonate. we have to find the molar mass of calcium carbonate, caco₃, which can be found by    molar mass = (mass ca) + (mass c) + 3(mass o)    = 40 + 12 + 3(16)    = 100 g/molconvert the given 5 g to moles:     mol caco₃ = 5 g caco₃ * 1 mol/(100 g) = 0.05 mol caco₃use stoichiometry (ratios) to figure out the moles of hcl needed. ratio wise, there's 2 hcls for every caco₃, so use dimensional analysis    mol hcl = mol caco₃ * (2 mol hcl) / (1 mol caco₃)    = 0.05 mol hcl * 2    = 0.1 mol hcl  we have 0.1 mol hcl and concentration of hcl (0.002 mol/cm³).we need to find volumesince concentration = moles / volume, rearrange to get     volume = moles / concentration    volume = 0.1 mol / (0.002 mol/cm³)    volume = 50 cm³