Air at 320 k saturated with water vapor is dehumidified by cooling to 285 k and by 2) condensation of water vapor. air leaving the dehumidifier saturated at 285 k is mixed with a part of the original air, which has bypassed the dehumidifier. the resulting air stream is reheated to 320 k. it is desired that the final air contain water vapor not exceeding 0.03 kg/kg of dry air. calculate: (a) the dry air bypassed (in kg) per each kg of dry air sent through the dehumidifier (b) the water vapor condensed in the dehumidifier (in kg) per 100 m2 of air sent through it. (c) the volume of final air obtained per 100 m2 of air passed though the dehumidifier total pressure of system = 1 atm or 101.3 kpa vapor pressure of water at 285 k = 1.4 kpa vapor pressure of water at 320 k = 10.6 kpa data:

part 1: the half-life of the element is 22 years.

part 2: it will take 132.02 year for the sample to decay from 308.0 g to 4.8125 g.

explanation:

part 1: there are two ways to determine the half life time.

first way: the half life time can be determined directly from its definition as it is the time required for the sample to decay to its half concentration.

from the data the initial concentration was 45.0 g and decayed to its half value (22.5 g) in 22.0 years.

second way: the radio active decay is considered first order reaction so we can use the laws of first order reactions.

k = (1/t) ln (a/a-x), where k is the rate constant of the reaction,

t is the time of the reaction

a is the initial concentration of the reactant

a-x is the remaining concentration at time (t)

a = 45.0 g the initial concentration at t = 0 year.

at t = 22 year, a-x = 22.5 g

then k = (1/22 year) ln (45.0 g/ 22.5 g) = 0.0315 year-1.

the half-life time (t1/2) = ln 2/ k = 0.693/ k =0.693/ 0.0315 = 22 years.

part 2:

using the same law k = (1/t) ln (a/a-x),

using the given data; a = 308.0 g and a-x = 4.8125 g and the calculated k from the part 1 (k = 0.0315 year-1)

t = (1/k) ln (a/a-x) = (1/0.0315) ln (308.0/ 4.8125) = 132.02 years

first let us lay out the formula for potential

and kinetic energy:

pe = mgh

ke = (mv^2)/2

where: m=mass, v=velocity, g=gravitational

acceleration, h=height

calculating for mass using the known values of

pe:

340j = m (9.81 m/s^2) (50ft) (1m/3.28ft)

m = 2.27 kg

the law of conservation of energy states that

energy is neither created nor destroyed. therefore, the change in kinetic

energy from 50 ft to 35 ft would be equal to the change in potential energy

from 50 ft to 35 ft. however it would be opposite in signs since one is losing

while other is gaining.

ke(35ft) – ke(50ft) = - [ pe(35ft) – pe(50ft]

ke(50ft) = 0 since the brick is initially at rest

ke(35ft) = 340j - 2.27kg (9.81 m/s^2) (35ft)

(1m/3.28 ft)

ke(35ft)

= 102.38 j

d.) circle motion requires a force to give it a centripetal acceleration.