Fill in tue blank with answer down ! when storm clouds produce lightning and thunder, energy changes energy and energy1) electric potential, gravitational potential, or sound? 2) chemical, electric potential, or radiant? 3) chemical, electric potential, or sound?

The inside surface of a cylindrical-shaped cave of inner diameter 1.0 m is continuously covered with a very thin layer of water. the cave is very long and it is open on both ends. the water on the cave surface is at a constant temperature of 15.5 °c. the cave is constantly exposed to wind such that 15.5 °c air flows through the cave at 4.5 m/s. the kinematic viscosity of the air is 14.66 x 10-6 m2/s and the molecular diffusion coefficient of water vapor in the air is 0.239 x 10-4 m2/s. because the cave diameter is so large, the flow of wind down the length of the cave, in the x direction, can be treated like it is external flow and the cave surface can be approximated as flat where appropriate. calculate the x value, in a) the transition to turbulent flow occurs at rex meters, where the air flow transitions from laminar to turbulent along the inside surface of the cave b) calculate the x value, in meters, where the bulk steady state concentration of water vapor in the air flowing in the cave is 10% of the saturation concentration. assume the air at the surface of the water layer is 100% saturated with water vapor. assume the wind entering the cave contained no moisture before it entered the cave. take into account the transition from laminar to turbulent flow when solving part b

Why do atoms emit energy of only specific wavelengths

Now that we have a feel for the state of the circuit in its steady state, let us obtain the expression for the current in the circuit as a function of time. note that we can use the loop rule (going around counterclockwise): e−vr−vl=0. note as well that vr=ir and vl=ldidt. using these equations, we can get, after some rearranging of the variables and making the subsitution x=er−i, dxx=−rldt. integrating both sides of this equation yields x=x0e−rt/l. use this last expression to obtain an expression for i(t). remember that x=er−i and that i0=i(0)=0. express your answer in terms of e, r, and l. you may or may not need all these variables. use the notation exp(x) for ex.