subject
Physics, 02.08.2019 10:00 nayeli09

One type of static electricity is the lightning in a thunder and lightning storm. clouds become negatively charged as ice crystals inside the clouds rub up against each other. meanwhile, on the ground, the positive charge increases. the clouds get so highly charged that the electrons jump from the ground to the cloud, or from one cloud to another cloud. this causes a huge spark of static electricity in the sky that we call lightning. which simple experiment could be conducted to show an example of how lightning is created? a) rub a balloon so it picks up extra electrons from the sweater or your hair and becomes slightly negatively charged. b) rub a balloon filled with air on a wool sweater or on your hair. then hold it up to a wall. c) connect the positive pole of an electrical source to the negative pole, so you create a circuit. d) walk across a carpet, shuffling your feet and touching something made of metal.

ansver
Answers: 2

Another question on Physics

question
Physics, 21.06.2019 18:10
An insurance company wants to know if the average speed at which men drive cars is higher than that of women drivers. the company took a random sample of 27 cars driven by men on a highway and found the mean speed to be 72 miles per hour with a standard deviation of 2.2 miles per hour. another sample of 18 cars driven by women on the same highway gave a mean speed of 68 miles per hour with a standard deviation of 2.5 miles per hour. assume that the speeds at which all men and all women drive cars on this highway are both approximately normally distributed with unknown and unequal population standard deviations.
Answers: 2
question
Physics, 22.06.2019 05:10
Total solidification times of three casting geometries are to be compared: a sphere, a cylinder, in which the length-to-diameter ration - 1.0, and a cube. volume = 1000 cm^3 for all three shhapes, and the same casting alloy is used. a) determine the solidification times of each geometry b) based on the results of part (a), which geometric element would make the best riser? c) if the mold constant = 3.5 min/cm^2 in chvorinov's rule, compute the total solidification time for each casting.
Answers: 3
question
Physics, 22.06.2019 10:50
Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.
Answers: 3
question
Physics, 22.06.2019 13:00
Aplayground merry-go-round has a radius of 4.6 m and a moment of inertia of 200 kg-m2 and turns with negligible friction about a vertical axle through its center. a child applies a 26.0 n force tangentially to the edge of the merry-go-round for 15.0 seconds. if the merry-go-round is initially at rest, how much work did the child do on the merry-go-round?
Answers: 1
You know the right answer?
One type of static electricity is the lightning in a thunder and lightning storm. clouds become nega...
Questions
question
Mathematics, 23.12.2021 22:20
question
Mathematics, 23.12.2021 22:20
Questions on the website: 13722363