What forces shape the stars in galaxies? (astronomy question, but didn't fit into any categories)

For problems 1-3, consider a simple dc brush motor with a permanent magnet stator. with an an consider a simple dc brush motor with a permanent magnet ae supply voltage of 100 v, the no-load speed of the motor is 1000 rpm. this motor can provide a torque of 1.9 n-m at 800 rpm drawing a current of 2 a current are both zero at no load.) 1. with an armature supply voltage of 100 v, the motor is operated at 900 rpm. what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input? what is the energy efficiency of the motor? with an armature supply voltage of 100 v, the motor is operated at 1100 rpm (where it acts as a generator). what torque input is required? what mechanical power is required what current is generated? what is the electrical power generated? what is the energy efficiency of the motor acting as a generator? 2. with an armature supply voltage raised to 120 v, the motor is operated at 1000 rpm. what is the no-load speed? what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input what is the energy efficiency of the motor? 3.

Scientific models are based on current knowledge, which can limit their effectiveness when new discoveries are made.

Asailboat is traveling to the right when a gust of wind causes the boat to accelerate leftward at 2.5m/s2 for 4s. after the wind stops, the sailboat is traveling to the left with a velocity of 3.0m/s.assuming the acceleration from the wind is constant, what was the initial velocity of the sailboat before the gust of wind? answer using a coordinate system where rightward is positive.