Physics, 01.08.2019 21:00 coylenoah0

Abattery applies 45 volts to a circuit, while an ammeter reads 10 ma. later, the ammeter reading drops to 7 ma. assuming the resistance has not changed, the voltage must have

Answers: 2

Show answers

Answers

Ohm's law relates the voltage, current and resistance using the following relation:
V = I*R
where:
V is the applied voltage
I is the current
R is the resistance
From this relation, we can note that the voltage and current are directly related to each other assuming constant resistance.
This means that when the current decreases, the voltage must have decreased as well.

Now, if we want to calculate the value of the new voltage, we can follow the following steps:
We are first given that:
Voltage = 45 volts
Current = 10 ma = 10*10^-3 ampere
Substituting in the above relation:
V = IR
R = V/I = 45/10*10^-3 4500 Ω
Later, the current dropped to 7*10^-3 ampere and the resistance is kept the same.
We will again substitute in the above equation to get the value of the new voltage as follows:
V = IR = 7*10^-3 * 4500 = 31.5 volts

Based on the calculations, our conclusion that the voltage will decrease as the current decreases is verified.

Answer from: mabutler2013

This can be computed using Ohm's law relates the voltage, current and resistance using the following relation:

V = I * R

Where:

V is the applied voltage

I is the current

R is the resistance

We can say that the voltage and current are straight related to each other supposing there is continuous resistance. Meaning that when the current decreases, the voltage must have decreased as well.

So let us calculate the new voltage:

Voltage = 45 volts

Current = 10 ma = 10*10^-3 ampere

Substituting in the above relation:

V = IR

R = V/I = 45/10*10^-3 4500 Ω

Well along, the current released to 7*10^-3 ampere and the resistance is reserved the same.

So using the old equation: V = IR = 7*10^-3 * 4500 = 31.5 volts

Therefore, the voltage decreases as the current decreases.

Answer from: Quest

answer: i'm not sure which is which for i get confused on it all the time but i can tell you that the answer lies with the convex and concave devices. i hope this you. have a good day and best of luck to you!

explanation:

For which optical devices does d sometimes have a positive value?

Answer from: Quest

That would be kinetic energy

Another question on Physics

Physics, 21.06.2019 19:30

Aparticle travels in a circular orbit of radius 21 m. its speed is changing at a rate of 23.1 m/s2 at an instant when its speed is 37.2 m/s. what is the magnitude of the acceleration (in m/s? ) of the particle?

Answers: 1

Answer

Physics, 21.06.2019 23:30

In order for the bug to fly through the air a force has to push the bug forward. identify this force. how does the bug produce

Answers: 1

Answer

Physics, 22.06.2019 05:10

Total solidification times of three casting geometries are to be compared: a sphere, a cylinder, in which the length-to-diameter ration - 1.0, and a cube. volume = 1000 cm^3 for all three shhapes, and the same casting alloy is used. a) determine the solidification times of each geometry b) based on the results of part (a), which geometric element would make the best riser? c) if the mold constant = 3.5 min/cm^2 in chvorinov's rule, compute the total solidification time for each casting.

Answers: 3

Answer

Physics, 22.06.2019 16:00

Which composition of water moves to begin a deepwater current?

Answers: 2

Answer

You know the right answer?

Abattery applies 45 volts to a circuit, while an ammeter reads 10 ma. later, the ammeter reading dro...

Questions