Regarding indonesia, which of the following statements is false

freezing

deposition

condensation

explanation;

melting also called fusion is the process where solid becomes liquid, sublimation is the process where solid becomes gaseous without first changing to liquid, deposition involves change from gaseous to solid state, freezing involves change from liquid to solid, boiling or evaporation involves change of liquid to gaseous state, while condensation is the change from gaseous state to liquid state.

endothermic reactions involves absorption of heat from the surroundings or the environment while exothermic reactions involves loss of heat energy to the surroundings.

in this case, sublimation, evaporation and melting are endothermic reactions (gain energy from the environment) while, freezing, deposition and condensation are exothermic (loss of energy to the surroundings) reactions.

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).