A 15-W compact fluorescent light bulb (CFL) produces the same amount of light as a 60-W incandescent while using only one fourth the power. Over the 9,000-hr lifetime of one CFL, compute carbon, SO2 , and particulates emissions what would be saved if one CFL replaces incandescent and the electricity comes from the coal fired

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

speed

ratio of distance traveled to time interval

net force

vector sum of forces on object

object

source of diverging light rays either luminous or illuminated

don't remove my answer im trying my best to answer them

explanation:

molecules are free to separate from each other and will take on the shape of the container. molecules move completely at random and high speeds. they vibrate in a fixed position and do not move around much. molecules expand to the edge of their container.