Physics, 29.10.2021 14:00 teasleycarl53

A traditional (incandescent) 60 Watt light bulb has a brightness of about 700-800 lumens. Incandescent bulbs are being phased out in many countries due to their low energy efficiency. The same brightness can be obtained using more efficient light sources, such as a 14 Watt CFL (Compact Fluorescent Light) bulb or an 8 Watt LED (light-emitting diode). For the rest of this exercise consider a light fixture with 3 lights that is in use an average of 4 hours per day. a) How much energy is used by this light fixture in the course of one year when using regular light bulbs, CFLs, or LEDs, respectively? Express your answers both in Joules and in kWh (kiloWatt hours).
b) The average Massachusetts residential electricity rate is 22.85 cents per kWh. How much money is saved in the above case when replacing the regular light bulbs with CFL or with LED bulbs, respectively? [1]
c) According to the US Energy Information Administration, about 0.92 pounds of CO2 are emitted to produce 1 kWh of energy. How much CO2 is saved per year when replacing the bulbs as described above (for both CFL and LED)?

Answers: 2

Show answers

Another question on Physics

Physics, 21.06.2019 18:40

The intensity, or loudness, of a sound can be measured in decibels (db), according to the equation , where i is the intensity of a given sound and is the threshold of hearing intensity. what is the intensity, in decibels, [i(db)], when ? use a calculator. round to the nearest whole number. 8 9 19 80

Answers: 1

Answer

Physics, 22.06.2019 05:30

Blank liquids and gases exert a buoyant force on objects placed in them

Answers: 3

Answer

Physics, 22.06.2019 11:20

The ultracentrifuge is an important tool for separating and analyzing proteins. because of the enormous centripetal accelerations, the centrifuge must be carefully balanced, with each sample matched by a sample of identical mass on the opposite side. any difference in the masses of opposing samples creates a net force on the shaft of the rotor, potentially leading to a catastrophic failure of the apparatus. suppose a scientist makes a slight error in sample preparation and one sample has a mass 10 mg larger than the opposing sample. if the samples are 12 cm from the axis of the rotor and the ultracentrifuge spins at 70,000 rpm, what is the magnitude of the net force on the rotor due to the unbalanced samples? ( be thorough on your answer)

Answers: 3

Answer

Physics, 22.06.2019 12:30

When a vertical beam of light passes through a transparent medium, the rate at which its intensity i decreases is proportional to i(t), where t represents the thickness of the medium (in feet). in clear seawater, the intensity 3 feet below the surface is 25% of the initial intensity i0 of the incident beam. what is the intensity of the beam "10" feet below the surface? (give your answer in terms of i0. round any constants or coefficients to five decimal places.)

Answers: 2

Answer

You know the right answer?

A traditional (incandescent) 60 Watt light bulb has a brightness of about 700-800 lumens. Incandesce...

Questions