Lab Report Guide 2. What procedure did you use to complete the lab? Outline the steps of the procedure in full sentences. (This is for the virtual and wet lab for 8th grade on Edge. nuity.)

In a wind tunnel the speed changes as the cross sectional area of the tunnel changes. if the speed in a 6' x 6' square test section is 100 mph, what was the speed upstream of the test section where the tunnel measured 20' x 20'? use conservation of mass and assume incompressible flow. conservation of mass requires that as the flow moves through a path or a duct the product of the density, velocity and cross sectional area must remain constant; i.e., that ova-constant. a model is being tested in a wind tunnel at a speed of 100 mph if the flow in the test section is at sea level standard conditions, what is the pressure at the model's stagnation point? (a) the tunnel speed is being measured by a pitot-static tube connected to a u- tube manometer. what is the reading on that manometer in inches of water? (b) at one point on the model a pressure of 2058 psf is measured. what is the local airspeed at that point?

The least penetrating form of radiation is

The average time that it takes for the car to travel the first 0.25m is s. the average time to travel just between 0.25 m and 0.50 m is s. given the time taken to travel the second 0.25 m section, the velocity would be m/s.