Charge of uniform density (80 nC/m3) is distributed throughout a hollow cylindrical region formed by two coaxial cylindrical surfaces of radii 1.0 mm and 3.0 mm. Determine the magnitude of the electric field at a point which is 2.0 mm from the symmetry axis.

Antireflective coatings on solar cells are often made by applying a thin film of silicon nitride (sinx), which has an index of refractive of 1.2, on the top of the silicon solar cell, which has a refractive index of about 3.5. however, the sun emits radiation of various wavelengths which the solar cell absorbs, and the antireflective coating can only absolutely minimize the reflection of one of these wavelengths. the coating thickness is chosen to reduce the reflection of green/yellow light (e = 2.2 ev), which is the most intense color in the solar spectrum (shown below). which of the following coatings would minimize reflection of green/yellow light? the answer is 820 nm how? what is the angular width of the central maximum of an electron traveling at 2 x 108 m/s going through a single slit of width 1 mm.

Consider each of the electric- and magnetic-field orientations given next. in each case, what is the direction of propagation of the wave? a)\vec ein the +xdirection,\vec bin the +ydirection. choose+ x direction- x direction+ y direction- y direction+ z direction- z direction b)\vec ein the -y direction,\vec bin the +x choose+ x direction- x direction+ y direction- y direction+ z direction- z direction c)\vec ein the +z direction,\vec bin the -x direction. choose+ x direction- x direction+ y direction- y direction+ z direction- z direction d)\vec ein the +y direction,\vec bin the -z direction. choose+ x direction- x direction+ y direction- y direction+ z direction- z direction

Abeam of light shining from water to air strikes the surface at an angle greater than 48 degrees and produces total internal reflection. if the incident beam is at a 50 degree angle what angle is the reflected beam 13 25 50 100