Write definitions for vector quantity, scalar quantity and resultant vector
Classify the following quantities as vectors or scalars: mass,
weight, temperature.
Force F = 5 N acts to the right.
Draw a fully labelled scale drawing of the 5 N force using a scale of
10 mm : 1 N. (Hint: Refer to Figure 5 on page 213.)
Draw and label the following vectors to scale (one below the other):
4.2.1 2F (Remember F = 5 N to the right)
4.2.2 0,5F
4.2.3 -F
4.2.4 -2F
Two vectors, F, and F, act on an object. F,= 2 N upwards and F, = 2 N
downwards.
Make a tail-to-head sketch vector diagram of the forces.
Explain whether F, and F, are equal vectors or not.
Calculate the resultant force.
CH​

Jasmine is diving off a 3-meter springboard. her height in meters above the water when she is x meters horizontally from the end of the board is approximated by the equation h=-x^2+3x+3. what is the maximum height jasmine will reach on her dive?

1. the materials manager for a billiard ball maker must periodically place orders for resin, one of the raw materials used in producing billiard balls. she knows that manufacturing uses resin at a rate of 50 kilograms each day, and that it costs $.04 per day to carry a kilogram of resin in inventory. she also knows that the order costs for resin are $100 per order, and that the lead time for delivery is four (4) days.2. at what point should resin be reordered? a. 0 kilograms remainingb. 50 kilograms remainingc. 200 kilograms remainingd. 400 kilograms remaininge. 500 kilograms remaining3. if order size was 1,000 kilograms of resin, what would be the length of an order cycle? a. 0.05 daysb. 4 daysc. 16 daysd. 20 dayse. 50 days4. if the order size was 1,000 kilograms of resin, what would be the average inventory level? a. 50 kilogramsb. 200 kilogramsc. 500 kilogramsd. 800 kilogramse. 1,000 kilograms5. if the order size was 1,000 kilograms of resin, what would be the daily total inventory costs, excluding the cost of the resin? a. $5b. $10c. $20d. $25e. $40

A5 foot by 5 foot box culvert is buried 6 feet beneath the surface of the ground. a crosssection of this very long culvert (into and out of the page) is illustrated below. assume that the soil in which the culvert is buried has the following properties: jt = 120 pcf, w = 12%, ko = 0.50, ka = 0.33, and kp = 3.00. calculate the total horizontal force per unit length of culvert (fh) felt on one of the vertical faces of the culvert.