subject
Physics, 18.05.2021 18:40 enriqueliz1680

A sheet of glass of refractive index 1.50 is coated with a 400 nm-thick layer of oil of index 1.36. What is the longest wavelength of light in the visible region (400 nm - 700 nm) for which you get destructive interference. Convert your answer into units of nm and enter it without the units. So if your answer is 645.6 nm, enter 645.6

ansver
Answers: 3

Another question on Physics

question
Physics, 21.06.2019 22:10
The consumption of fossil fuels could be
Answers: 2
question
Physics, 21.06.2019 23:30
Classify the following soils according to the uscs classification system. provide appropriate uscs designations. a) this sample of well-graded gravel with sand was obtained from a large earthen dam in vancouver, canada. the sample has 73% fine to coarse sub-angular gravel, 25% fine to coarse sub-angular sand and 2% fines. the maximum size of the particles is 75 mm. the coefficient of curvature is 2.7, while the uniformity coefficient is 12.4. b) this dark brown and wet soil with a “strong organic odor” has 100% passing the no. 200 sieve. the liquid limit of the material is 32% when not dried and is 21% when oven-dried. the plastic index is 21% when not dried. c) this sand has 61% predominantly fine sand, 23% silty fines, and 16% fine sub-rounded gravel size. the maximum size is 20 mm. the liquid limit is 33% and the plastic limit is 27%. d) this soil has 74% fine to coarse sub-angular reddish sand and 26% organic and silty dark brown fines. the liquid limit is 37% when not dried and is 26% when oven dried. the plastic index is 6% when not dried.
Answers: 1
question
Physics, 22.06.2019 01:10
Asteam power plant operates on an ideal reheat rankine cycle between the pressure limits of 15 mpa and 10 kpa. the mass flow rate of steam through the cycle is 12 kg/s. steam enters both stages of the turbine at 500°c. if the moisture content of the steam at the exit of the low-pressure turbine is not to exceed 10 percent, determine (a) the pressure at which reheating takes place, (b) the total rate of heat input in the boiler, and (c) the thermal efficiency of the cycle. also, show the cycle on a t-s diagram with respect to the saturation lines. (2.15 mpa; 45.0 mw; 42.6%)
Answers: 3
question
Physics, 22.06.2019 15:30
What is an aquifer for science class
Answers: 2
You know the right answer?
A sheet of glass of refractive index 1.50 is coated with a 400 nm-thick layer of oil of index 1.36....
Questions
question
Mathematics, 22.09.2019 04:50
question
Biology, 22.09.2019 04:50
Questions on the website: 13722360