To determine the muzzle velocity of a bullet fired from a rifle, you shoot the 2.47-g bullet into a 2.43-kg wooden block. The block is suspended by wires from the ceiling and is initially at rest. After the bullet is embedded in the block, the block swings up to a maximum height of 0.295 cm above its initial position. What is the velocity of the bullet on leaving the gun's barrel

Amother used 150 watts of power to raise a 15 newton object in a time interval of 8.0 seconds. through what vertical distance was the object raised ?

Find the steady-state temperature at the center of the plate = /2, = /2) for sums of w from n=1 to n=19 (only odd values). find the value of n for which the change in /2, /2) is less than 1% from the value at the previous n. at this point, we consider the solution converged. does the value of the temperature at the center seem reasonable? in this part, the values of x and y are constant scalar values. you should produce a plot of the value of n on the horizontal and the estimate of the temperature at the center of the plate on the vertical. b. using the value of n (or larger) that resulted in convergence in part (a), create a contourf plot of the temperature distribution across the entire plate. use enough spatial subdivisions to create a useful plot. comment on the results. hint: you need to determine what “x” and “y” values to use to make your t matrix. i recommend using a different number of x and y values. use enough x and y values so that the plot is “smooth”.

There are multiple tuning forks present in the room, and annie strikes one with a natural frequency of 400 hz. which of these other tuning forks will begin to vibrate through resonance and make the sound louder? a 200 hz tuning fork a 400 hz tuning fork a 800 hz tuning fork a 1600 hz tuning fork