Physics, 12.10.2019 02:50 swello1937

Elements with low specific heat values have which characteristic?

low atomic mass

high thermal energy

low kinetic energy

low number of atoms per gram

Answers: 3

Show answers

Another question on Physics

Physics, 21.06.2019 16:20

When a resistor with resistance r is connected to a 1.50-v flashlight battery, the resistor consumes 0.0625 w of electrical power. (throughout, assume that each battery has negligible internal resistance.) what power does the resistor consume if it is connected to a 12.6-v car battery? assume that r remains constant when the power consumption changes.

Answers: 1

Answer

Physics, 22.06.2019 12:30

Consider a 1000 w iron whose base plate is made of 0.5 cm thick aluminum alloy 2024-t6 (ρ = 2770 kg/m3 and cp = 875 j/kg°c). the base plate has a surface area of 0.03 m2. initially, the iron is in thermal equilibrium with the ambient air at 22°c. assuming 90% of the heat generated in the resistance wires is transferred to the plate, determine the minimum time needed for the plate temperature to reach 200°c.

Answers: 1

Answer

Physics, 22.06.2019 18:00

Astudent pushes a 60-n block across the floor for a distance of 10 m. how much work was done to move the block

Answers: 1

Answer

Physics, 22.06.2019 19:10

3. a worker pushes a 30.5 kg polished stone along a polished table with a force on bonin a straight line for 5.20 s after starting from rest. there is no friction between thestone and the table. at the end of the table. the stone is hooked to a cable with a lengthof 62.0 cm to rotate it to a rough table to store until they can be picked up. the roughtable has a coefficient of static friction 0.702 with the polished stone. remember that 8= 9.80 m/s2a) what is the speed of the stone when it is hooked to the cable? b) what is the tension in the cable while the stone is rotating? (there is still nofriction)c) how much force is needed to make the stone begin sliding from rest on therough table? ius = 0.70262.0 cm30.5 kg20.5 kg6= 0

Answers: 2

Answer

You know the right answer?

Elements with low specific heat values have which characteristic?

low atomic mass
...

Questions