Answers: 1
Physics, 21.06.2019 14:50
Acylindrical specimen of a nickel alloy having an elastic modulus of 207 gpa (30 × 106psi) and an original diameter of 10.2 mm (0.40 in.) experiences only elastic deformation when a tensile load of 8900 n (2000 lbf) is applied. compute the maximum length of the specimen before deformation if the maximum allowable elongation is 0.25 mm (0.010 in.)
Answers: 3
Physics, 22.06.2019 01:10
Suppose that two tanks, 1 and 2, each with a large opening at the top, contain different liquids. a small hole is made in the side of each tank at the same depth 1.57 m below the liquid surface, but the hole in tank 2 has 2.49 times the cross-sectional area of the hole in tank 1. (a) what is the ratio ρ1/ρ2 of the densities of the liquids if the mass flow rate is the same for the two holes? (b) what is the ratio rv1/rv2 of the volume flow rates from the two tanks? (c) at one instant, the liquid in tank 1 is 14.9 cm above the hole. if the tanks are to have equal volume flow rates, what height above the hole must the liquid in tank 2 be just then?
Answers: 3
Physics, 22.06.2019 11:20
More solar radiation is absorbed by earth’s surface than by
Answers: 1
Why must indirect evidence be used to study the structure of atoms?...
Mathematics, 17.01.2021 04:10
Mathematics, 17.01.2021 04:10
Mathematics, 17.01.2021 04:20
Mathematics, 17.01.2021 04:20
Mathematics, 17.01.2021 04:20
Mathematics, 17.01.2021 04:20
Arts, 17.01.2021 04:20
Mathematics, 17.01.2021 04:20
Mathematics, 17.01.2021 04:20