subject
Physics, 10.10.2019 02:40 itzdulce

What is a common use of nitric acid?

making ointments
making ceramics
cleaning windows
producing dyes

ansver
Answers: 3

Another question on Physics

question
Physics, 22.06.2019 03:10
Athin plate moves between two parallel, horizontal, stationary flat surfaces at a constant velocity of v = 7.5 m/s. the two stationary surfaces are spaced 4 cm apart, and the medium between them is filled with oil whose viscosity is 0.9 n·s/m2. the part of the plate immersed in oil at any given time is 2 m long and 0.5 m wide. if the plate moves through the mid-plane between the surfaces, determine the force required to maintain this motion. what would your response be if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top surface (h1)? if the plate moves through the mid-plane between the surfaces, the force required to maintain the motion will be n. if the plate was 1 cm from the bottom surface (h2) and 3 cm from the top (h1) surface, the force required to maintain the motion would be n.
Answers: 2
question
Physics, 22.06.2019 12:30
Compare the horizontal displacement of the two balls as they travel to the ground. what do you observe?
Answers: 1
question
Physics, 22.06.2019 13:00
The substances that are necessary for producing of certain hormones and that store and transport vitamins
Answers: 1
question
Physics, 22.06.2019 13:40
An ideal otto cycle has a compression ratio of 10.5, takes in air at 90 kpa and 40°c, and is repeated 2500 times per minute. using constant specific heats at room temperature, determine the thermal efficiency of this cycle and the rate of heat input if the cycle is to produce 90 kw of power.
Answers: 2
You know the right answer?
What is a common use of nitric acid?

making ointments
making ceramics
clean...
Questions
question
Mathematics, 07.12.2020 06:00
question
History, 07.12.2020 06:00
question
Mathematics, 07.12.2020 06:00
question
History, 07.12.2020 06:00
Questions on the website: 13722359