Why is the equator not the hottest place on earth?

You have been consulted by the mobile phone company hookup about a new augmented reality product called “brows”. they want to develop an alternative to google glasses, which, you recall, is a proposed new product which plans to superimpose a whole range of wireless google services over the user’s ordinary vision of the world. these appear in little circles and ovals, and let you phone people, take photographs, navigate across cities and inside buildings, find shops and update your social media. brows would do this too, but not be limited to special google services. the user would wear a small cylinder-shaped device designed to fit on top of their existing eyewear (glasses or sunglasses). it would project a reversed image onto the inside of the lenses, the reflection of which would be in focus for the user. instead of voice control, the user would control the device by eye and neck movements, which the device would track. the device would connect via bluetooth to the user’s phone, which would supply most of the computing power and wireless connectivity. hookup also wants to know what existing services would be most in demand, and which would not work well with brows. using your knowledge of augmented reality, wearable technology and interface design, is the project feasible? if not, why not? if feasible, how could the product need to be modified for a better experience?

Suppose that two tanks, 1 and 2, each with a large opening at the top, contain different liquids. a small hole is made in the side of each tank at the same depth 1.57 m below the liquid surface, but the hole in tank 2 has 2.49 times the cross-sectional area of the hole in tank 1. (a) what is the ratio ρ1/ρ2 of the densities of the liquids if the mass flow rate is the same for the two holes? (b) what is the ratio rv1/rv2 of the volume flow rates from the two tanks? (c) at one instant, the liquid in tank 1 is 14.9 cm above the hole. if the tanks are to have equal volume flow rates, what height above the hole must the liquid in tank 2 be just then?

The ultracentrifuge is an important tool for separating and analyzing proteins. because of the enormous centripetal accelerations, the centrifuge must be carefully balanced, with each sample matched by a sample of identical mass on the opposite side. any difference in the masses of opposing samples creates a net force on the shaft of the rotor, potentially leading to a catastrophic failure of the apparatus. suppose a scientist makes a slight error in sample preparation and one sample has a mass 10 mg larger than the opposing sample. if the samples are 12 cm from the axis of the rotor and the ultracentrifuge spins at 70,000 rpm, what is the magnitude of the net force on the rotor due to the unbalanced samples? ( be thorough on your answer)