subject
Physics, 28.09.2019 23:30 pinbunny70

Calculate the water pressure in the pipes at the bottom of a high-rise building that is fed by reservoir 60 m above the roof top

ansver
Answers: 1

Another question on Physics

question
Physics, 22.06.2019 03:00
An internally reversible refrigerator has a modified coefficient of performance accounting for realistic heat transfer processes of where qin is the refrigerator cooling rate, qout is the heat rejection rate, and is the power input. show that copm can be expressed in terms of the reservoir temperatures tc and th, the cold and hot thermal resistances rt,c and rt,h, and qin, as where rtot rt,c rt,h. also, show that the power input may be expressed as 1.39 a household refrigerator operates with cold- and hot-temperature reservoirs of tc 5 c and th 25 c, respectively. when new, the cold and hot side resistances are rc,n 0.05 k/w and rh,n 0.04 k/w, respectively. over time, dust accumulates on the refrigerator’s condenser coil, which is located behind the refrigerator, increasing the hot side resistance to rh,d 0.1 k/w. it is desired to have a refrigerator cooling rate of qin 750 w. using the results of problem 1.38, determine the modified coefficient of performance and the required power input w under (a) clean and (b) dusty coil conditions. internally reversible refrigerator qout qin w high-temperature reservoir low-temperature reservoir th th,i tc,i tc high-temperature side resistance low-temperature side resistance w qin th tc qinrtot tc qinrtot copm tc qinrtot th tc
Answers: 2
question
Physics, 22.06.2019 11:30
Where is the potential energy throughout the loading, cocking, and releasing of the trebuchet?
Answers: 2
question
Physics, 22.06.2019 12:00
Lacie kicks a football from ground level at a velocity of 13.9 m/s and at an angle of 25.0° to the ground. how long will the ball be in the air before it lands? how far will the football travel before it lands?
Answers: 1
question
Physics, 22.06.2019 12:00
Asolid round steel rod 6.25 mm in diameter and 375 mm long is rigidly bonded to the end of solid square brass rod 25 mm on a side and 300 mm long. the geometric axes of the bare are along the same line. an axial tensile force of 5.4 kn is applied at the extreme ends of the assembly. for steel e = 200 gpa and for brass e = 90 gpa. determine the total elongation for the assembly.
Answers: 1
You know the right answer?
Calculate the water pressure in the pipes at the bottom of a high-rise building that is fed by reser...
Questions
question
Mathematics, 03.08.2020 14:01
question
Mathematics, 03.08.2020 14:01
question
Mathematics, 03.08.2020 14:01
question
Mathematics, 03.08.2020 14:01
question
Mathematics, 03.08.2020 14:01
Questions on the website: 13722361