Coherent light of frequency f travels in air and is incident on two narrow slits. The interference pattern is observed on a distant screen that is directly opposite the slits. The frequency of light f can be varied. For f = 5.60 × 1012 Hz there is an interference maximum for e = 60.0°. The next higher frequency for which there is an interference maximum at this Part A What is the separation d between the two slits? angle is 7.47 x 1012 Hz Express your answer with the appropriate units. HÀ Value d = .

Alow cost, low earth orbit (leo) satellite is to be fabricated at a university, for subsequent launch by rocket. what are the constraints and objectives for selection of a material suitable for the satellite bus (i.e. the structure)? explain each in brief. (15 marks) b)suggest sources of data which could support the selection of materials for applications in space. (5 marks) c) set weights for the objectives listed in (2a) using the digital logic method. (5 marks)

What is the measurement of how fast an object moves relative to a reference point?

Acommercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at -35°c by rejecting waste heat to cooling water that enters the condenser at 18°c at a rate of 0.25 kg/s and leaves at 26°c. the refrigerant enters the condenser at 1.2 mpa and 50°c. if the compressor consumes 3.3 kw of power, determine (a) the mass flow rate of the refrigerant, (b) the refrigeration load, (c) the cop, and (d) the minimum power input to the compressor for the same refrigeration load.