subject
Physics, 08.04.2021 21:40 keananashville

A block of mass m=34 kg has a speed V and is behind a block of mass M = 81-kg that is moving with a speed of 0.50 m/s (both blocks are moving in the same directions). The surface is frictionless and the blocks collide and couple. After the collision, the blocks have a common speed of 0.90 m/s. What is the magnitude of the impulse on the 34-kg block due to the collision? a.32 N. s

b 14 N. s

c 57 N. s

d 73 N. s

e 41 N. s

ansver
Answers: 1

Another question on Physics

question
Physics, 21.06.2019 23:00
Follow these directions and answer the questions. 1. set up the ripple tank as in previous investigations. 2. bend the rubber tube to form a "concave mirror" and place in the ripple tank. the water level must be below the top of the hose. 3. generate a few straight pulses with the dowel and observe the reflected waves. do the waves focus (come together) upon reflection? can you locate the place where the waves meet? 4. touch the water surface where the waves converged. what happens to the reflected wave? 5. move your finger twice that distance from the hose (2f = c of c, center of the curvature) and touch the water again. does the image (the reflected wave) appear in the same location (c of c)? you may have to experiment before you find the exact location. sometimes it is hard to visualize with the ripple tank because the waves move so quickly. likewise, it is impossible to "see" light waves because they have such small wavelengths and move at the speed of light. however, both are examples of transverse waves and behave in the same way when a parallel wave fronts hit a curved surface.
Answers: 1
question
Physics, 22.06.2019 12:00
Asolid round steel rod 6.25 mm in diameter and 375 mm long is rigidly bonded to the end of solid square brass rod 25 mm on a side and 300 mm long. the geometric axes of the bare are along the same line. an axial tensile force of 5.4 kn is applied at the extreme ends of the assembly. for steel e = 200 gpa and for brass e = 90 gpa. determine the total elongation for the assembly.
Answers: 1
question
Physics, 22.06.2019 13:00
At a certain instant after jumping from the airplane a, a skydiver b is in the position shown and has reached a terminal (constant) speed vb = 52 m/s. the airplane has the same constant speed va = 52 m/s, and after a period of level flight is just beginning to follow the circular path shown of radius ρa = 2330 m. (a) determine the velocity and acceleration of the airplane relative to the skydiver. (b) determine the time rate of change of the speed vr of the airplane and the radius of curvature ρr of its path, both as observed by the nonrotating skydiver.
Answers: 3
question
Physics, 22.06.2019 14:30
Two steel balls, each of mass m, are welded to a light rod of length l and negligible mass and are initially at rest on a smooth horizontal surface. a horizontal force of magnitude f is suddenly applied to the rod as shown. determine (a) the instantaneous acceleration a of the mass center g and (b) the corresponding rate at which the angular velocity of the assembly about g is changing with time.
Answers: 2
You know the right answer?
A block of mass m=34 kg has a speed V and is behind a block of mass M = 81-kg that is moving with a...
Questions
question
Biology, 21.10.2020 03:01
question
Mathematics, 21.10.2020 03:01
question
Mathematics, 21.10.2020 03:01
question
Mathematics, 21.10.2020 03:01
question
Mathematics, 21.10.2020 03:01
Questions on the website: 13722361