Physics, 19.03.2021 01:00 chanceypray3514

Consider a Carnot heat-engine cycle executed in a steady-flow system using steam as the working fluid. The cycle has a thermal efficiency of 30%, and steam changes from saturated liquid to saturated vapor at 275oC during the heat addition process. If the mass flow rate of the steam is 3 kg/s, determine the net power output of this engine, in kW.

Answers: 3

Show answers

Answers

Answer from: Quest

answer: d. a cme increases the amount of energy in the solar wind

explanation:

coronal mass ejections, also called cmes, are large clouds of plasma and magnetic field that erupt from the sun. only when the cloud is aimed at earth will the cme hit earth and therefore cause impacts. high-speed solar wind streams come from areas on the sun known as coronal holes.

Answer from: Quest

Neptune is the eighth planet from the sun. it was the first planet to get its existence predicted by mathematical calculations before it was actually seen through a telescope on sept. 23, 1846. irregularities in the orbit of uranus led french astronomer alexis bouvard to suggest that the gravitational pull from another celestial body might be responsible. german astronomer johann galle then relied on subsequent calculations to spot neptune via telescope. previously, astronomer galileo galilei sketched the planet, but he mistook it for a star due to its slow motion. in accordance with all the other planets seen in the sky, this new world was given a name from greek and roman mythology — neptune, the roman god of the sea.

Answer from: Quest

probably not if net force is zero

Answer from: Quest

russian is not my first language, so i'm afraid i can't write out an answer in russian, but hopefully you can find a way to do so. here's my best translation of the problem: you're given a plot of a particle's position in one-dimensional space over time, and you're asked to find either the total distance traveled by the particle after 6 seconds had elapsed, or the total displacement of the particle after 6 seconds.

if you want the total distance traveled, you would first need to determine the particle's velocity as a function of time, then integrate that over the 6-second interval. we know the position function is quadratic with roots at 0 and 6, so we have

$x(t)=ax(x-6)$

where $a$ is unknown. because the position is parabolic, there is symmetry about the midpoint at $t=3$ , and we know that

$x(3)=10\implies -9a=10\implies a=-\dfrac{10}9$

so that the position function is

$x(t)=-\dfrac{10}9x(x-6)$

which means the velocity is

$v(t)=\dfrac{\mathrm dx}{\mathrm dt}=-\dfrac{20}9x+\dfrac{60}9$

then the total distance traveled is

$\displaystyle\int_{t=0}^{t=6}|v(t)|\,\mathrm dt=\left\{\int_{t-0}^{t=3}-\int_{t=3}^{t=6}\right\}v(t)\,\mathrm dt=20$

so the total distance traveled is 20 m.

on the other hand, if you want to find displacement: the particle starts at $x=0$ and ends at $x=0$ , so its displacement is 0.

Another question on Physics

Physics, 21.06.2019 16:00

As shown in fig. p3.64, a closed, rigid tank fitted with a fine-wire electric resistor is filled with refrigerant 22, initially at 2108c, a quality of 80%, and a volume of 0.01 m3. a 12-volt battery provides a 5-amp current to the resistor for 5 minutes. if the final temperature of the refrigerant is 408c, determine the heat transfer, in kj, from the refrigerant.

Answers: 1

Answer

Physics, 21.06.2019 17:50

Which describes an image that can be produced by a concave lens? the image is real and smaller than the object. the image is virtual and larger than the object. the image is virtual and smaller than the object. the image is real and larger than the object.

Answers: 3

Answer

Physics, 22.06.2019 06:20

Clothing made of several thin layers of fabric with trapped air in between, often called ski clothing, is commonly used in cold climates because it is light, fashionable, and a very effective thermal insulator. so it is no surprise that such clothing has largely replaced thickand heavy old-fashioned coats. (a) consider a jacket made of five layers of 0.1-mm-thick synthetic fabric (k = 0.13 w/m·°c) with 1.5-mm-thick air space (k = 0.026 w/m·°c) between the layers. assuming the inner surface temperature of the jacket to be 28°c and the surface area to be 1.25 m2, determine the rate of heat loss through the jacket when the temperature of the outdoors is 0°c and the heat transfer coefficient at the outer surface is 25 w/m2·°c. (b) what would your response be if the jacket is made of a single layer of 0.5-mm-thick synthetic fabric? what should be the thickness of a wool fabric (k = 0.035 w/m·°c) if the person is to achieve the same level of thermal comfort wearing a thick wool coat instead of a five-layer ski jacket?

Answers: 1

Answer

Physics, 22.06.2019 07:00

Within a pendulum, as potential energy decreases, energy increases. a. heat b. kinetic c. frictional d. gravitational

Answers: 1

Answer

You know the right answer?

Consider a Carnot heat-engine cycle executed in a steady-flow system using steam as the working flui...

Questions